Reassigning Component Buttons; Changing Volume Lock - Gateway 23-inch User Manual

Remote Control User's Guide

Reassigning component buttons

You can reassign the component buttons on the remote control if you have
more than one of the same type of component.
Example:
If you are using the remote to control the cable (CBL), DVD, TV, and two VCRs,
you can reassign the CD button as a second VCR button.
To reassign component buttons:
1
Press and hold the
2
Press
3
Press the component button that you want (
component button that you are reassigning (
now reassigned and can be programmed as a VCR component button. See
"Programming the remote control" on page 7.

Changing volume lock

The remote control can be set to control volume through your TV while in cable
(CBL), DVD, CD, and VCR component modes. Use the volume lock if you want
to control the volume for all components through a specific component.
Example:
You want to control volume for all components through the receiver (AUX).
To change the volume lock:
1
Press and hold the
2
Press
3
Press the component button that you want (
twice. Volume will now be controlled through the receiver for all
components.
20
SETUP
. The LED flashes twice.
9 9 2
SETUP
. The LED flashes twice.
9 9 3
www.gateway.com
button until the LED flashes twice.
VCR
CD
button until the LED flashes twice.
AUX
) once, then press the
) once. The CD button is
) once. The LED flashes