For programming instructions, see “Programming the remote control” on page 7. TV. Selects a programmed TV. Pre-programmed for your 23-inch or 26-inch LCD TV. DVD. Selects a programmed DVD player. Pre-programmed for Gateway’s DVD player. VCR. Selects a programmed VCR.
Page 7
Number button pad. Selects a channel or enters a password. MUTE. Turns the sound on and off. 100. Scans four channels at a time in TV mode. Works as an Enter button in other video modes. VOL. Turns volume up or down.
Page 8
GUIDE does not work in TV mode. INFO. Shows the current status of your LCD TV, such as the video input source, audio status, and channel number. . Navigates the on-screen display (OSD) menus.
Page 9
RGB connector as the input source. DVI. Selects the component connected to the DVI connector as the input source. TV. Selects TV as the input source. AV1. Selects the component connected to the AV1 connector as the input source. AV2/S2. Selects the component connected to AV2 connector as the input source.
Remote Control User’s Guide Inserting batteries To install batteries: ■ Insert two AA batteries into the remote control. Make sure that you match – compartment. on the batteries with the www.gateway.com symbols inside the battery –...
Programming the remote control The TV component button has been preset to work with your Gateway LCD TV (program code 0080). You can program the remote control to work with as may as seven other components. To program the remote to control other components: Turn on the component.
Press and hold the flashes twice. Press , then press the component button on the remote control twice. 9 9 2 button until the LED flashes twice. SETUP button on the remote control until the LED SETUP www.gateway.com Programming the remote control...
Example: If you are using the remote to control the cable (CBL), DVD, TV, and two VCRs, you can reassign the CD button as a second VCR button. To reassign component buttons:...
9 7 5 Press the component button that you want ( Press the button on the LCD TV remote control that you are assigning the new function to. The LED flashes quickly while it is waiting to receive the signal from the teaching remote control.
Your LCD TV features an on-screen display (OSD) that lets you adjust and save contrast, brightness, and other settings. Your LCD TV saves changes you make to the settings, even if you turn off your TV. See the documentation that came with your LCD TV for more information about the OSD.
Setting the sleep timer Set the sleep timer using the remote control. The sleep timer lets you set a time delay to turn off your LCD TV automatically. You can set the sleep timer using the remote control or the OSD.
PiP modes will not work when parental controls are turned button on the remote control to open the OSD. buttons to select the Setup Menu Closed Caption Parental Controls TV System Auto Search Manual Search Move Setting Return www.gateway.com menu, then press the Setup [OFF] [Air] EXIT...
Page 29
Use the number pad to enter your password if prompted. If you have not set a password, enter 0000. For more information about setting a password, see “Setting a password” on page 30. Please Input Password _ _ _ _ www.gateway.com Parental Controls [OFF] Setting Return...
Page 30
MPAA [Unblock] [Unblock] PG-13 [Unblock] [Unblock] NC-17 [Unblock] [Unblock] Move Setting Return buttons to select each option, then press the Unblock button when you are finished making changes to this option. www.gateway.com option, then press MPAA EXIT button...
Page 31
To set the parental controls using TV Guidelines: Press the button on the remote control to open the OSD. MENU Press the buttons to select the button to open the menu. Closed Caption Parental Controls TV System Auto Search Manual Search...
Page 32
“Setting a password” on page 30. Press the pressthe Press the to change the settings. This option menu lets you block TV program ratings. You can also block programs using the Block Content option. Password Please Input Password _ _ _ _ buttons to select the button to open the option menu.
Page 33
■ S (sexual situations) ■ L (adult language) ■ D (sexual dialog) ■ Press the button when you are finished making changes to this option. EXIT www.gateway.com Block Content [Unblock] [Unblock] [Unblock] [Unblock] [Unblock] Setting Return EXIT Changing OSD options...
Parental Controls Status MPAA TV Guidelines Can. English TV Can. French TV Change Password Move Setting Return www.gateway.com menu, then press the Setup [OFF] [Air] EXIT sub-menu, then Parental Controls [OFF] EXIT...
Page 35
Parental Controls Status MPAA TV Guidelines Can. English TV Can. French TV Change Password Move www.gateway.com buttons at the same time and hold for Password Change Password [OFF] Setting Return EXIT Changing OSD options sub-menu, then...
Page 36
Use the number button pad to enter a new four-digit password when prompted. Re-enter the new four-digit password. Press the EXIT Password Enter New Password _ _ _ _ Reconfirm New Password _ _ _ _ button to close the OSD. www.gateway.com...
See “Programming the remote control” on page 7. ■ Make sure that you tried all the program codes listed for the component manufacturer. See “Component program codes” on page 8. ■ Search for the component code. See “Searching for component codes” on page 19. www.gateway.com Troubleshooting...
Page 38
Remote Control User’s Guide www.gateway.com...