Searching For Component Codes - Gateway 23-inch User Manual

Searching for component codes

If you cannot find your manufacturer in the component list or the program
code does not work, you can use the remote control to search for the correct
component code.
To search for a component code:
1
Turn on the component.
2
Press the matching component button on the remote control.
3
Press and hold the
4
Press
9 9 1
5
Point the remote control at the component and alternate between pressing
the
POWER
the component turns off.
If the component still does not respond, clear the component button, then
repeat the search procedure.
To clear the component button:
1
Make sure that the component is turned on.
2
Press and hold the
flashes twice.
3
Press
9 9 2
button until the LED flashes twice.
SETUP
. The LED flashes twice.
button and the component button on the remote control until
button on the remote control until the LED
SETUP
, then press the component button on the remote control twice.
www.gateway.com
Programming the remote control
19