Gateway Solo 9550 User Manual page 208

Chapter 13: Networking Your Notebook
8
Click
9
Enter the name of the network. For an access point network, we
recommend entering the name of the access point device followed by
the SSID name found on the back of the access point. Example:
RG1000 1ff60a.
10
Click the
11
Click to clear the
12
Enter the network key. This key must be the last five digits of the network
name, for example ff60a.
13
Select
14
Select
15
Select
16
Make sure that the
selected.
17
Make sure that the
box is not selected.
202
. The Wireless Network Properties dialog box opens.
Add
Data encryption (WEP enabled)
The key is provided for me automatically
from the
ASCII characters
40 bits (5 characters)
from the
0 Key index (advanced)
Network Authentication (Shared mode)
This is a computer-to-computer (ad hoc)
www.gateway.com
check box.
list.
Key format
from the
Key length
list.
check box.
list.
check box is not
network check