Adjusting Audio Settings - Gateway Solo 9550 User Manual

Chapter 12: Using the Port Replicator and Docking Station
To undock your notebook:
1
Click
on the front of the docking station. The Undock Computer menu item
appears in the Start menu only while the notebook is docked.
2
Lift the release latch on the docking station until the notebook is
disconnected.
3
Lift the notebook off of the docking posts.

Adjusting audio settings

Your notebook is configured to use only its internal audio jacks and speakers,
even while docked. To turn on the docking station's external speakers and
audio jacks, if you have Windows Me, you must change audio settings. The
settings are changed automatically in Windows 2000 and Windows XP. You
can also configure the notebook's internal speakers (analog audio) to pass
through the digital audio jack to the docking station.
To turn on the docking station's external speakers and audio jacks in
Windows Me:
1
Double-click the speaker icon on the taskbar. The Volume Control dialog
box opens.
2
Click
opens.
3
Click
are turned on.
- OR -
Click
jack is turned on.
174
, then select
Start Undock Computer
. The Advanced Controls for Volume Control dialog box
Advanced
for analog audio. The docking station audio jacks
Docked Speakers
for digital audio. The docking station digital audio
Enable S/PDIF
www.gateway.com
or press the Docking Eject button