Reinstalling Windows Nt 4.0 Audio Device Drivers - Gateway Solo 3350 User Manual

Reinstalling Windows NT 4.0 audio device
drivers
Use the instructions in this section to reinstall the drivers that support the
audio devices in your computer.
To reinstall the Windows NT 4.0 audio device driver:
1
Make sure you ran the Windows NT 4.0 Locator utility to find the audio
device driver. For more information, see "Locating Windows NT 4.0
drivers" on page 209.
2
Place Disc 1 of the System Restoration Kit into your CD/DVD drive.
3
If the CD starts automatically, close the CD window.
4
If the driver location information for your audio device driver ends with
a file name (for example, setup.exe), go to Step 5.
- OR -
If the driver location information for your audio device driver ends with
a backslash (\), go to Step 10.
5
Click
Start
6
In the
drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in "Locating
Windows NT 4.0 drivers" on page 209.
7
Click
OK
8
Reinstall your audio device driver by following the on-screen
instructions. You have completed the driver reinstallation.
9
If required, go to "Reinstalling Windows NT 4.0 modem device drivers"
on page 217. Otherwise, go to "Reinstalling the Windows NT Service
Pack" on page 221.
10
Click
Start
window opens.
11
Double-click the
opens.
214
Reinstalling Device Drivers
, then select
Run
text box, type the drive letter (usually D:\ where D is the
Open
.
, then select
Settings
Multimedia
. The Run dialog box opens.
, then
Control Panel
icon. The Multimedia Properties dialog box
. The Control Panel