Table of Contents
Advertisement
Your 56K modem does not connect at 56K
Current FCC regulations restrict actual data transfer rates over public
telephone lines to 53K. Other factors, such as line noise, telephone service
provider equipment, or ISP limitations, may lower the speed even further.
Upload (sending data out from your computer) speeds are limited to 33.6K.
Check your modem connection speed and dial-up network (DUN)
connections by accessing the gateway.your.way dial-up server. The server
also contains drivers, patches, and updates for current Gateway hardware
and software.
The server provides a secure connection and is a stand-alone server. You
cannot use it to access the Internet. The server cannot be accessed
Mondays from 8:00 a.m. to 12:00 p.m. Central Time, when the server is
backed up.
To access the gateway.your.way dial-up server:
1
Double-click the
Dial-Up Networking
2
If the Welcome to Dial-Up Networking wizard opens, click
3
Double-click the
gateway.your.way in the
text box.
4
Click
Configure
5
Click the
Options
and
dialing
6
Click
Next
7
In the
Telephone number
. Include any special numbers (such as 9, to get an outside line)
Next
that are required by your telephone system.
8
Click
Finish
Networking window.
9
Right-click the
gateway.your.way Properties dialog box opens.
10
If you are using Windows Me, go to step 11. Otherwise, click the
Server Types
IPX/SPX Compatible
My Computer
icon.
Make New Connection
Type a name for the computer you are dialing
.
tab, click to select the
Display modem status
.
text box type 1-888-888-0520, then click
. An icon for gateway.your.way appears in the Dial Up
gateway.your.way
tab and click to clear the
check boxes, then click
icon, then click/double-click the
icon, then type
Bring up terminal window after
check boxes, then click
icon, then click
Properties
Log on to network, NetBEUI
. Go to step 13.
OK
Troubleshooting
.
Cancel
.
OK
. The
, and
241
Advertisement
Table of Contents
Troubleshooting
