Samsung MultiXpress K760 Series User Manual page 349

Installing driver over the network
• If you install the driver using the supplied software CD, V4 driver is not
installed. If you want to use the V4 driver in the
download from the Samsung website, www.samsung.com
product > Support or downloads.
• If you want to install Samsung's printer management tools, you need to
install them using the supplied software CD.
1 Make sure that the machine is connected to the network and powered
on. Also, your machine's IP address should have been set.
2 From Charms, select Settings > Change PC settings > Devices.
3 Click Add a device.
Discovered machines will be shown on the screen.
Click the model name or host name you wish to use.
4
You can print a Network Configuration Report from the machine's control
panel that will show the current machine's host name.
The driver is automatically installed from the Windows Update.
5
Silent installation Mode
Desktop screen, you can
>find your
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on your computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Command- line
/s or
/S
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Definition
Starts silent installation.
Description
Installs machine drivers
without prompting any UIs or
user intervention.
349
3. Network Setup