Samsung MultiXpress K760 Series User Manual page 269

Solving other problems
Condition
Misformed • If characters are improperly formed and producing hollow
images, the paper stock may be too slick. Try different
characters
paper (see "Print media specifications" on page 282).
• If characters are improperly formed and producing a wavy
effect, the scanner unit may need service. Cleaning the
scan unit or contact a service representative.
Page skew • Ensure that the paper is loaded properly.
• Check the paper type and quality (see "Print media
specifications" on page 282).
• Ensure that the paper or other material is loaded correctly
and the guides are not too tight or too loose against the
paper guides.
• Ensure that the standard tray right bottom door, dual
cassette feeder right bottom door or high capacity feeder
right bottom door is securely closed. If the bottom doors
are not completely closed, open and close the bottom
doors.
Suggested Solutions Condition
Curl or wave • Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature
and humidity can cause paper curl (see "Print media
specifications" on page 282).
• Turn the stack of paper over in the tray. Also try rotating
the paper end for end and placing it back in the tray.
Wrinkles or • Ensure that the paper is loaded properly.
creases
• Check the paper type and quality (see "Print media
specifications" on page 282).
• Also try rotating the paper end for end and placing it back
in the tray.
• Ensure that the standard tray right bottom door, dual
cassette feeder right bottom door or high capacity feeder
right bottom door is securely closed. If the bottom doors
are not completely closed, open and close the bottom
doors.
Suggested Solutions
10. Troubleshooting
269