Resetting The Scanner Roller Counter - Epson Workforce DS-860N User Manual

9. While applying gentle pressure on the separation roller, close the separation roller cover.
Note: If you are not able to close the cover, the roller is not installed correctly. First, make sure the
roller is all the way to the right. Try to close the cover. If you are still unable to close the cover,
remove the roller and reinstall it, then try to close the cover again.
10. Close the scanner cover.
11. Plug in the AC adapter and turn on the scanner..
12. Reset the roller counter after replacing both sets of rollers.
Parent topic:
Related tasks
Checking the Scanner Roller Counter

Resetting the Scanner Roller Counter

When you replace the scanner rollers, reset the scanner roller counter so you know when you may need
to replace the rollers again.
1. Make sure the scanner is turned on and connected to your computer.
2. Do one of the following to open Epson Scan Settings:
• Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings.
• Windows (other versions): Click
Scan > EPSON Scan Settings.
3. Click Maintenance.
You see a screen like this:
Replacing the Scanner Rollers
or Start > All Programs or Programs > EPSON > EPSON
74