Table of Contents
Advertisement
13. Close the separation roller cover until you hear it click into place.
Note: If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.
14. Close the scanner cover.
15. Connect any disconnected cables.
16. Plug in the AC adapter and turn on the scanner.
17. Reset the roller counter.
Resetting the Scanner Roller Counter
Parent topic:
Related tasks
Changing the Scanner Position (DS-32000)
Resetting the Scanner Roller Counter
When you replace the scanner rollers or perform regular cleaning, reset the scanner roller counter so
you know when you may need to perform maintenance again.
1. Press the
2. Select a maintenance task:
• If you replaced the pickup rollers, select Pickup Roller Replacement.
• If you replaced the separation rollers, select Separation Roller Replacement.
• If you cleaned the interior of the scanner, select Regular Cleaning.
3. Select Reset the Number of Scans.
Note: If the administrator has set an administrator password and locked the settings, you will need to
enter the password.
4. Select Yes to reset the roller counter.
Parent topic:
Cleaning and Transporting Your Scanner
home button, if necessary, and select Scanner Maintenance.
Replacing the Scanner Rollers
139
Advertisement
Table of Contents
