Ripple Patterns Appear In An Image; Line Of Dots Appears In All Scanned Images; Scanned Image Edges Are Cropped - Epson Workforce DS-860N User Manual

tab. Make sure Fine Reader is selected as the OCR Engine setting and click OK twice. Try your scan
again using Epson Scan.
Parent topic:
Related references
Available Image Adjustments

Ripple Patterns Appear in an Image

You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused
by interference from differing pitches in the scanner's screen and your original's halftone screen. To
reduce this effect, adjust these Epson Scan settings (if available) and try scanning again:
• Select the Descreening setting.
• Select a lower Resolution setting.
Parent topic:
Related references
Available Image Adjustments

Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free
cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not
recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
Parent topic:
Related tasks
Cleaning Inside Your Scanner

Scanned Image Edges are Cropped

If the edges of a scanned image are cropped, try the following solutions:
• Select Auto Detect as the Size setting (Epson Scan) or the Document Size setting (Document
Capture Pro or Document Capture).
• Adjust the cropping area shown in the Crop Margins for Size "Auto" setting in Epson Scan.In
Document Capture Pro, select Detailed Settings from the Scan window. Click Configuration and
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
86