Replacing The Separation Rollers - Epson Workforce DS-860N User Manual

15. Close the pickup roller cover.
Note: If you are not able to close the cover, the pickup rollers are not installed correctly. Make sure
the rollers are all the way to the left, then try to close the cover. If you still cannot close the cover,
remove the rollers and reinstall them, then try to close the cover again.
16. Replace the separation rollers.
Parent topic:
Related tasks
Checking the Scanner Roller Counter

Replacing the Separation Rollers

Replace the scanner rollers after you have scanned 200,000 times. Check the scanner roller counter to
see when you need to replace the rollers.
1. Turn off the scanner and unplug the AC adapter.
2. Disconnect any connected cables.
3. Pull down on the cover open lever and open the scanner cover.
Replacing the Scanner Rollers
70