Installing Pointwrite Module On; Projector To Use Interaction Function - BenQ LX890USTD User Manual

Installing PointWrite Module on Projector to
use interaction function
You can install a PointWrite module (PW40U, an optional accessary sold
independently) on the projector to start the interactive function.
Camera Installation on Projector
Make sure the PointWrite camera is installed properly before you active interactive
function.
Use the USB cable to connect the projector to PC. Plug the USB mini-B end into the
projector and plug the USB type-A end into PC.
Check "Device Manager" from your computer to make sure that PointWrite device is
recognized by your computer.
When finishing the PointWrite Module Installation, please refer to the PW40U User
manual for further instruction.
Operation 47