Press
/
on the projector or
remote control to display the 2D Keystone page. Press
to adjust vertical values from -20 to 20. Press
adjust horizontal values from -20 to 20.
•
Using the OSD menu
1.
Press MENU/EXIT and select the DISPLAY
menu.
2.
Press
to select 2D Keystone and press
MODE/ENTER.
3.
Press
/ / /
•
Using the QUICK INSTALL key
1.
Press QUICK INSTALL on the remote control.
2.
Press
to select 2D Keystone and press MODE/
ENTER.
3.
Press
/ / /
Adjusting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
•
Using the OSD menu
1.
Select Corner Fit in the DISPLAY menu and
press MODE/ENTER.
2.
Press
/ / /
corners and press MODE/ENTER.
/
/
to adjust the keystone values.
to adjust the keystone values.
to select one of the four
/
on the
/
/
to
Operation
25