Samsung Multifunction ProXpress C267 Series User Manual page 219

System Setup
Item
Tone Adjustment • Default: The machine automatically calibrates the
toner density of machine for the best possible color
print quality. If you select Off, the machine is calibrated
by the factory default toner density.
• Auto Tone Adjustment: Allows you to automatically
adjust tone for the best possible print quality.
• Calibrating ID Sensor: Automatically calculates the
reduced or worn out supplies like toner or machine
parts and uses this information to adjust the color
density. For example, if the yellow toner is running
out, the machine calculates the amount of remaining
yellow toner and adjusts color density so the printouts
are fine.
You can reduce the amount of water vapor produced
during printing.
Vapor Mode
• Off: Disables vapor mode.
• On: Enables vapor mode.
• Auto: Automatically enters vapor mode according to
time in high humidity environments.
If you use a machine in a humid area, or you are using the
damp print media caused by a high humidity, the print-
outs on the output tray may be curled and may not be
Paper Stacking
stacked properly. In this case, you can set the machine to
use this function to let print-outs stacked firmly. But,
using this function will make the print speed slow.
Description Item
Optimizes print quality according to the humidity in the
Humidity
environment.
8
Sound/Volume
• You can check the features available in the
overview" on page 31).
• Some menus may not appear in the display depending on options or
models.
To change the menu options:
• Select (Setup) > Machine Setup > Next > Initial Setup > Sound/
Volume on the touch screen.
Item
Turns the key sound on or off. A tone sounds each time a
Key Sound
key is pressed if this option is on.
Turns the alarm sound on or off. An alarm tone sounds
Alarm Sound
when an error occurs or fax communication ends if this
option is on.
Description
Basic Guide (see "Menu
Description
219
3. Useful Setting Menus