Samsung Multifunction ProXpress C267 Series User Manual page 173

Wireless network setup
14
Setting up on the touch screen
Before starting, you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
Connecting to a wireless network
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over the
network" on page 160).
1 Select (Setup) > Machine Setup > Next > Network Setup > Wi-Fi >
Wi-Fi Settings on the touch screen.
2 Select the setup method you want.
• Search List (recommended): The machine will display a list of
available networks from which to choose. After a network is chosen
then printer will prompt for the corresponding security key.
• Custom: In this mode, users can give or edit manually their own SSID
, or choose the security option in detail.
Re-connecting to the network
When the wireless connection is lost, the machine automatically tries to re-
connect to the access point (or wireless router) with the previously used wireless
connection settings and address.
In the following cases, the machine automatically re-connects to the
wireless network:
• The machine is turned off and on again.
• The access point (or wireless router) is turned off and on again.
Canceling the connection process
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release
need to wait 2 minutes to re-connect to the wireless network.
(Stop) on the control panel. You
2. Using a Network-Connected Machine
173