Sent Fax Quality Is Poor - Epson Workforce Pro WF-R5690 User Manual

Note: Make sure the memory device has enough available memory and is not write protected.
• If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your
faxes in smaller batches.
• If the product cannot print a received fax due to a product error, such as a paper jam, the memory full
error may appear. Clear any product errors, then ask the sender to resend the fax.
Parent topic:
Related references
Output Settings - Fax
Fax Sending Options
Related tasks
Viewing a Fax on the LCD Screen

Sent Fax Quality is Poor

If the sent fax quality is poor, try these solutions:
• Clean the scanner glass.
• Clean the ADF.
• Try changing the resolution setting on the control panel.
• Try adjusting the density setting on the control panel.
• If you are sending a monochrome fax to a single recipient, try sending the fax using the Direct Send
feature.
Note: If you send a high-resolution monochrome fax without using the Direct Send feature, the
product may automatically lower the resolution.
• Try enabling the error correction mode (ECM) setting.
Parent topic:
Related references
Basic Settings - Fax
Fax Sending Options
Related tasks
Cleaning Your Product
Solving Faxing Problems
Solving Faxing Problems
371