Table of Contents
Advertisement
62
LG Network Client Program
NOTE
•
If you want to display the grid, mark up the [Show Grid]
option.
•
If you want to select the entire area, click the [Set All] button
or click the [Clear All] button to cancel the selected area.
Sequence
You can view all the channels in sequence in the selected screen
division mode. You cannot use sequence mode with the 16 split
(LRH7080D series: 8 split). While the sequence mode condition, if
you change the screen division mode, the sequence function will
be canceled.
•
Main Dwell Time: Selects the channel sequence time for main
monitor.
•
Spot Dwell Time: Selects the channel sequence time for spot
monitor.
OSD
•
Channel Name: Mark up to displays or removes the channel
name in the channel window.
•
Channel Status: Mark up to displays or removes the channel
status in the channel window.
•
Font Size: Selects the font size of characters such as the channel
5
name and playback time which displayed on the channel
window.
•
Position: Selects the position of characters such as the channel
name and playback time which displayed on the channel
window.
Record settings
1. Select a day of the week.
2. Mark up the desired recording option.
•
N : No schedule recording.
•
C (Continuous recording): Recording starts automatically
from the preset time.
•
S (Sensor event recording): Recording starts automatically
when the sensor alarm occurs within a designated time.
•
M (Motion event recording): Recording starts automatically
when motion is detected within a designated time.
•
T (Text event recording): Recording starts automatically
when text input is detected within a designated time.
•
S+M (Sensor+Motion recording): Recording starts
automatically when the sensor alarm signal has been input
or motion has been detected.
•
C+S (Continuous+Sensor event recording): Recording starts
automatically from the preset time. When the sensor alarm
occurs within a designated time, changes the continuous
recording mode to sensor event recording mode and
recording starts automatically.
•
C+M (Continuous+Motion event recording): Recording
starts automatically from the preset time. When the
motion is detected within a designated time, changes the
continuous recording mode to motion event recording
mode and recording starts automatically.
•
C+T (Continuous+Text event recording): Recording starts
automatically from the preset time. When the text input
occurs within a designated time, changes the continuous
recording mode to text event recording mode and
recording starts automatically.
•
C+S+M (Continuous+Sensor+Motion event recording):
Recording starts automatically from the preset time. When
the sensor alarm signal has been input or motion has
been detected, changes the continuous recording mode
to motion event recording mode and recording starts
automatically.
•
S+M+T (Sensor+Motion+Text event recording): When
the sensor alarm signal has been input, motion has been
detected or the text input occurs and then recording starts
automatically.
•
C+S+M+T (Continuous+Sensor+Motion+Text event
recording): Recording starts automatically from the preset
time. When the sensor alarm signal has been input, motion
has been detected or the text input occurs within a
designated time, changes the continuous recording mode
to occurred event recording mode and recording starts
automatically.
3. Select the desired channel to schedule recording.
4. Click the start time cell block and drag & drop to select a time
period cell block.
or
Click the start time cell block of a channel and drag & drop
across the channels to select the time period block for multi-
channel setting at the same time. The color of the cell blocks
will be changed.
Schedule day copy settings
1. Select the source day to copy.
2. Click the [Schedule Copy] button to display the schedule copy
setup window.
3. Select the destination day from the day of the week, weekday or
weekend options.
4. Click the [Copy] button on the Day Copy option to copy the
scheduled data of the day.
Schedule channel copy settings
1. Select the day.
2. Click the [Schedule Copy] button to display the schedule copy
setup window.
3. Select the source channel.
4. Select the destination channel.
5. Click the [Copy] button on the Channel copy option to copy the
scheduled data of the channel.
Advertisement
Table of Contents
