Table of Contents
Advertisement
Setup Wizard settings
The Setup Wizard appears on the screen when you turn on the
unit for the first time or select [Setup Wizard] on the Setup menu.
You can set the DVR name, display language, data, time, network
settings, recording schedule and recording mode on the initial
setup wizard.
NOTE
If you run the Setup Wizard when DVR Setup has already been
completed, the data previously configured could be deleted.
Step 1
Set DVR name and display language.
•
DVR Name: Enter the DVR name by using alphabetic letter,
numeric digit and symbols up to 21 characters.
•
Language: Select a language for the setup menu and
information display.
Step 2
Set date and time.
•
Date: Select the current year, month and day.
•
Time: Select the current time.
•
Date Format: Select the date display format.
•
Time Format: Select the time display format.
•
Time Zone: Select the time zone in the area where the DVR is
installed.
•
Daylight Saving: Mark up when you use the daylight saving
function.
•
Daylight Saving Start: Select the Daylight Saving start time.
•
Daylight Saving End: Select the Daylight Saving end time.
Installation
43
3
Advertisement
Table of Contents
