Table of Contents
Advertisement
System settings
Properties
•
DVR Name: Enter the DVR name by using alphabetic letter,
numeric digit and symbols up to 21 characters.
•
Language: Select a language for the setup menu and
information display.
•
Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
•
Video Format: Selects the video format to NTSC or PAL according
to your video system format. If you change the video format, the
HDD is formatted with selected video format. After the HDD has
been formatted, the confirmation message is displayed. Select
[OK] and press OK. The system will reboot.
NOTE
All cameras must be disconnected before you change the
video format to prevent malfunction.
•
Resolution: Sets the output resolution of the HDMI video signal.
•
Configuration Import: Import the DVRs configuration data from
the USB memory stick.
•
Configuration Export: Export the configuration data from this
DVR to the USB memory stick.
•
Factory Default: You can reset the DVR to its original factory
settings. Some options cannot be reset (date, time, daylight
saving, time zone and user password settings).
TCP/IP v4
•
Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
•
DHCP: Select this option when a DHCP server is installed on the
network to allow IP address assignment. With this setting, the IP
address is assigned automatically.
•
IP Address: Enter the IP address.
•
Subnet Mask: Enter the subnet mask address.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
•
Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
TCP/IP v6
•
Interface: Select a LAN port you want to use (Ethernet 0 or
Ethernet 1).
•
Auto: Select this option to assign the IP address automatically.
•
IP Address: Enter the IP address.
•
Subnet Prefix Length: Enter the Subnet Prefix length.
An IPv6 prefix indicates the portion of the address used for
routing or identifying an address range.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
•
Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
Installation
27
3
Advertisement
Table of Contents
