Original Orientation; Continuous Scan; File Name Entry - Kyocera ECOSYS M2635dn Operation Manual

Sending Faxes > Original Orientation

Original Orientation

To scan the original in the correct orientation, specify which side of the original is the top. To set a 2-sided original,
the orientation of the placed original must be set.
Select original orientation from [Top Edge on Top] or [Top Edge on Left].
Item
Top Edge on Top
Top Edge on Left

Continuous Scan

Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [End Scan].
(Value: [Off] / [On])

File Name Entry

Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters)
To add date and time, select [Date] and the [OK] key. To add job number, select [Job No.] and the [OK] key. To add
both, select [Job No. + Date] or [Date + Job No.] and the [OK] key.
Original
Original
, and select the [OK] key.
3-17
Image

Original orientation

Original orientation