Cancelling Transmission (Disconnection Of Communication) - Kyocera ECOSYS M2635dn Operation Manual

Sending Faxes > Basic transmission procedure

Cancelling Transmission (Disconnection of Communication)

Follow this procedure to break the connection and stop transmission/reception.
1
2
Select the [Status/Job Cancel] key.
Disconnection of communication.
1
[FAX] > [OK] key
2
Check the status of communication.
3
Select [Line Off].
When communication is disconnected, transmission stops.
NOTE
To cancel direct transmission, delayed transmission, or polling transmission, refer to the
section for that function.
To cancel direct transmission, refer to the following:
Cancelling Direct Transmission (page 3-20)
To cancel a delayed transmission or send a fax by immediate transmission, refer to the following:
Cancelling Delayed Transmissions (Queued) (page 3-20)
To cancel polling transmission, refer to the following:
Polling Reception (page 5-19)
3-6