Onkyo HT-S3910DAB Instruction Manual page 83

6. Miscellaneous
„ 1. Tuner
Change the settings for TUNER.
Setting Item Default Value
FM Search Level Normal
DAB Auto Scan -
DAB DRC Off
„ 2. Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value
Version -
Update via USB -
„ 3. Initial Setup
Make the initial setup from the setup menu.
Setting Details
If automatic tuning regularly stops on FM stations with weak
reception when "Normal" is selected, select "Strong" so only
those FM stations with strong reception are selected.
You can run the auto scan when new DAB stations
are added or when you move house.
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening
at low volume levels - ideal for listening to the radio
late at night when you don't want to disturb anyone.
"Off": DRC off
"Large": Large reduction in dynamic range
"Small": Small reduction in dynamic range
Setting Details
The current firmware version is displayed.
Press ENTER to select when updating the firmware
via USB.
Contents Connections
≫
„ 4. Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value
Setup Parameter Unlocked
83
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
≫