Table of Contents
Advertisement
1. Input/Output Assign
„ 1. TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
Setting Item
Default Value
1080p -> 4K
Off
Upscaling
Super Resolution
2
OSD Language
English
Impose OSD
On
Setting Details
When using a TV that supports 4K, video signals
input at 1080p can be automatically upscaled to 4K
for output.
"Off": When this function is not to be used
"Auto": When this function is to be used
• Select "Off" if your TV does not support 4K.
• If the TV does not support the 4K resolution
with the same frequency as the frequency of
HDMI input video signals, upscaling to 4K is not
correctly performed. Check the frequency of 4K
resolution supported by the TV, and change the
resolution of the video signals input from the AV
component.
When you have set "1080p -> 4K Upscaling" to
"Auto", you can select the degree of video signal
correction from "Off" and between "1" (weak) and
"3" (strong).
Select the on-screen display language from the
following.
English, German, French, Spanish, Italian, Dutch,
Swedish, Russian, Chinese
Set whether or not to display information such as
volume adjustment or switching of input on the TV
screen.
"On": OSD is displayed on the TV.
"Off": OSD is not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. In this case,
change the resolution of the connected device.
Contents
Connections
≫
Setting Item
Default Value
Mini Player OSD
Always On
Screen Saver
3 minutes
71
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
Setting Details
You can display on the TV the images from another
input selected last while playing the audio from
BLUETOOTH input. After switching the input to
BLUETOOTH, play the images and audio. And then
when you press MODE on the remote controller,
the image is displayed in full-screen mode, and the
audio information (Mini Player) for BLUETOOTH is
displayed in the corner of the screen. You can set
whether to always display this Mini Player on the
screen.
"Always On": The Mini Player is always displayed.
"Auto Off": The Mini Player turns off automatically
in 30 seconds after displayed. If operation such as
changing the volume is performed, it is displayed
again for 30 seconds.
• Each time the MODE button is pressed, the
image display/non-display can be switched.
• This setting cannot be selected if "Impose OSD"
is set to "Off".
• When "OSD Language" is set to Chinese, this
function cannot be used.
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes",
"10 minutes" and "Off".
≫
Advertisement
Table of Contents
