Table of Contents
Advertisement
Setup Menu
Menu list
You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations". (
1. Input/Output
1. TV Out / OSD
Assign
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
2. Speaker
1. Configuration
2. Crossover
3. Distance
4. Level Calibration
5. Dolby Enabled
Speaker
6. Speaker Virtualizer
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. LFE Level
5. Volume
4. Source
1. IntelliVolume
2. Name Edit
Audio Select
Video Select
Contents
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
Change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
Change input assignment between the input selectors and AUDIO IN jacks.
Change the settings of connection environment of the speakers.
Change the settings of crossover frequencies.
Set the distance from each speaker to the listening position.
Adjust the volume level of each speaker.
Change the settings of Dolby Enabled Speakers.
The Speaker Virtualizer function can be switched between On and Off.
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
Change the Volume settings.
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
When "TUNER" or "BLUETOOTH" input is selected, you can set the input from which video is
displayed on the TV.
68
Connections
≫
≫
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
p70)
p71
p72
p73
p73
p74
p74
p75
p76
p76
p76
p77
p77
p77
p77
p78
p78
p78
p79
p79
≫
Advertisement
Table of Contents
