Camera Toolbar - Lorex N882A38B User Manual

8 Using the On-Screen Display
• Right-click anywhere on the Live View screen.
1. Viewing Modes: Select how many channels are shown on screen during live viewing.
2. Pan/Tilt/Zoom: Control and configure settings for Pan-Tilt-Zoom (PTZ) cameras. For full
instructions on connecting and using PTZ cameras, see 19 Pan/Tilt/Zoom (PTZ) Cameras,
page 91.
3. AutoFocus: Access zoom/focus controls for auto-focus cameras (not included).
4. Camera Setting: Configure image settings for cameras. For full details, see 8.5 Camera Im-
age Settings, page 18.
5. Info: Displays system information, such as model number, device ID, IP address, etc.
6. Sequence: Start or stop Sequence Mode. In Sequence Mode, the system display will auto-
matically cycle through connected channels every few seconds.
7. Disable Beep: Temporarily disable the current audible warning.
NOTE
Audible warnings can be given for a wide range of events, such as hard drive issues, network connectivity,
motion detection events and more. Disabling the current audible alarm using the Quick Menu will silence
the recorder only for a short time, then audible warnings will continue.
8. Playback: Opens the Playback Menu. This allows you to search for video recordings saved
on the recorder's hard drive. For details on using the Playback menu, see 10 Playback, page
26.
9. Smart Search: Search for person and vehicle detection events only from compatible cam-
eras. For full instructions, see 14.3 Searching for Person & Vehicle Detection Events (Smart
Search), page 46
10. Manual: Select manual recording and snapshot options. For details, see 9.4 Setting up
Scheduled or Manual Recording, page 23.
11. Device Search: Open the Device Search menu to manage IP cameras over the local network.
12. Main Menu: See 16 Using the Main Menu, page 53 for full instructions on using the Main
Menu.

8.3 Camera Toolbar

The Camera Toolbar lets you perform quick functions for a specific channel on the recorder.
To use the Camera Toolbar:
• Hover the mouse near the top of a channel with a connected camera.
#LX400117; r. 6.0/57895/57895; en-US 17