Table of Contents
Advertisement
16
Using the Main Menu
To access the network load menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click NETWORK. Click the Network Load tab on the side panel.
16.3.8 Network Test
Test if your system can connect to other devices over the LAN or Internet. You can enter the IP
address of a device and click Test to determine if your system can connect to it.
To access the network test menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click NETWORK. Click the TEST tab on the side panel.
16.3.9 BPS
Shows bitrates of connected cameras. The bitrate is the amount of data the camera is sending to
the system.
#LX400117; r. 6.0/57895/57895; en-US
64
Advertisement
Table of Contents
