Using The Camera Toolbar; Using Instant Playback; Using Zoom In Live Display - Lorex DV700 Series Instruction Manual

9 Using the System

9.5 Using the Camera Toolbar

The Camera Toolbar is used to perform actions on a specific channel.
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
1. Instant Playback
2. Zoom
3. Realtime backup
4. Snapshot
5. Mute/Unmute

9.5.1 Using Instant Playback

Instant Playback is used to playback the last 5~60 minutes of video from the selected
channel. You can also access Instant Playback in split-screen mode, while still viewing live
video from the other channels.
To use Instant Playback:
1. Move your mouse to the top of the channel display and click
NOTE
By default, the system will begin playback from 5 minutes ago. You can increase this to up to 60 mi-
nutes using the Instant Playback setting in Main Menu>Setting>General.
2. Right-click to exit Instant Playback.

9.5.2 Using Zoom in Live Display

1. Move your mouse to the top of the channel display and click
zoom. A check mark will appear in the icon to indicate digital zoom is activated.
NOTE
You may activate digital zoom in multiple channels at the same time.
2. Click and drag inside the channel to zoom in.
• Click and drag to pan the zoom area.
• Right-click to zoom out and select a new zoom area.
• Click to disable digital zoom. Note that the channel will remain at the same
zoom level until you right-click inside it.
#LX400060; r.30328/30328; en-US
.
to activate digital
22