Ricoh M C250FW User Manual page 347

Message
Network is not Ready A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
On Hook or Stop key The machine has been off-hook
for an extended period of time.
Out of Paper: X The indicated tray has run out of
paper.
Please Restart The machine needs to be
Machine restarted.
Remove Paper: The machine failed to proceed
with the print job, because tray
Bypass Tray
1 or Tray 2 was specified as the
input tray but paper was set in
the bypass tray.
Replace Intermediate The transfer belt is no longer
Transfer Belt usable, and must be replaced.
Replace Required The print cartridge is almost
Soon: empty.
Toner Cartridge (X)
Replace Required The waste toner bottle needs to
Soon: be replaced soon.
Waste Toner Bottle
Replacement The fusing unit is no longer
Required: usable, and must be replaced.
Fusing Unit
Replacement The paper feed roller is no
Required: longer usable, and must be
replaced.
Paper Feed Roller
Causes
Wait until the machine receives the IP
address information completely, and then
try the operation again.
Put down the handset phone or press the
[Clear/Stop] key.
Load paper to the indicated tray. See
page 48 "Loading Paper".
Turn off the power, and then turn it back
on.
Remove paper from the bypass tray.
Contact your sales or service
representative.
Prepare a new print cartridge.
Prepare a new waste toner bottle.
Contact your sales or service
representative.
Contact your sales or service
representative.
Error and Status Messages on the Screen
Solutions
345