Over-Temperature Protection; Residual Heat Warning; Default Working Times - Smeg SE232TD Instructions For Installation And Use Manual

Table of Contents

Advertisement

(set to 5 minutes)
b) Once the countdown timer expires, the corresponding zone will switch off. Then it
will show the new min. timer and the dot of corresponding zone will flash.
c) When cooking timer expires, the corresponding cooking zone will be switch off
automatically.
Note:
1) The red dot next to power level indicator will illuminate indicating that zone is
selected.
2) If you want to change the time after the timer is set, you have to start from step 1.
3.3.6

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic hob.
When an excessive temperature is monitored, the ceramic hob will stop operation
automatically.
3.3.7

Residual Heat Warning

When the hob has been operating for some time, there will be some residual heat.
The letter " H "appears to warn you to keep away from it.
3.3.8

Default working times

Another safety feature of the hob is automatic shutdown. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in the
table below:
Power level
Default working timer (hour)
TIMER
zone 1#
TIMER
1
8
(set to 15 minutes)
zone 2#
2
3
4
5
8
8
4
4
EN-14
6
7
8
9
4
2
2
2

Advertisement

Table of Contents
loading

Table of Contents