Table of Contents
Advertisement
Problem
The glass is being
scratched.
Some pans make
crackling or clicking
noises.
8. Installation
8.1 Selection of installation equipment
1.
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole. Be sure the thickness of the work surface is at least
30mm. Please select heat-resistant and insulated work surface material (Wood
and similar fibrous or hygroscopic material shall not be used as work surface
material unless impregnated) to avoid the electrical shock and larger deformation
caused by the heat radiation from the hotplate. As shown below:
Note: The safety distance between the sides of the hob and the inner surfaces of
the worktop should be at least 3mm.
A
B
268+4
500+4
-0 mm
2.
The ceramic cooker hob can be used on the table top of cabinet. The ceramic hob
should be placed horizontally. As shown below:
Possible causes
Rough-edged cookware.
Unsuitable, abrasive
scourer or cleaning
products being used.
This may be caused
by the construction of
your cookware (layers
of different metals
vibrating differently).
C
50mm mini 50mm mini 50mm mini 50mm mini 3mm mini
-0 mm
Use cookware with flat and
smooth bases. See 'Choosing
the right cookware'.
See 'Care and cleaning'.
This is normal for cookware and
does not indicate a fault.
D
E
EN-18
What to do
SEAL
Min. 3 mm
F
G
Advertisement
Table of Contents
