Table of Contents
Advertisement
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Removing a Lens
You can remove a lens to replace it with a different lens.
Warning: Turn off the projector and unplug its power cord before attaching or removing a lens;
otherwise you could receive an electric shock.
Caution: Remove the lens only when necessary and make sure the front of the projector is not facing up
when you remove the lens. This prevents dirt or dust from entering the projector and lowering the
projection quality. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to
the lens surface.
1. Center the lens using the Lens Shift button.
2. Turn off the projector and unplug the power cord.
Warning: Wait about 30 minutes after turning off the projector before removing the lens. Touching
the lens immediately after projecting or turning off the projector may cause burns.
3. Use your hand to loosen the screw securing the lens cover to the projector.
Attaching and Removing a Lens
47
Advertisement
Table of Contents
