4. Select one of the following and press Enter:
• Type P for Panasonic projectors
• Type M for Mitsubishi projectors
• Type N for NEC projectors
• Type S for Sony projectors
• Type SA for Sanyo projectors
5. Turn the projector off and on again to enable the protocol emulation you selected.
Parent topic:
Related references
Projector Parts - Interface Ports
Projector Setup Settings - Extended Menu
Saving Settings to Memory and Using Saved Settings
You can save customized settings and then select the saved settings whenever you want to use them.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
Adjusting Projector Features
190