Table of Contents
Advertisement
Event ID Code List
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Event ID code
0432
0435
0434
0482
0484
0485
0433
0481
0483
04FE
0479
04FF
0891
0892
0893
0894
0898
0899
Cause and solution
Turn the projector off and then on again.
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
Cannot display the transferred images. Restart the network software.
Communication with computer was disconnected. Restart the network software.
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
Communication error. Turn the projector off and then on again.
230
Advertisement
Table of Contents
