Table of Contents
Advertisement
3. To cycle through the available aspect ratios for your input signal, press the Aspect button
repeatedly.
Note: If you are projecting from a computer and parts of the image are cut off, set the Resolution
setting to Wide or Normal in the Signal menu.
Parent topic:
Related references
Available Image Aspect Ratios
Input Signal Settings - Signal Menu
Related tasks
Setting the Screen Type
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the selected Screen Type setting and
the input signal from your image source.
Note: Black bands and cropped or stretched images may project in certain aspect ratios, depending on
the aspect ratio and resolution of your input signal.
Aspect ratio setting
Auto
Normal
4:3
16:9
Full
H-Zoom
V-Zoom
Native
Image Aspect Ratio
Description
Automatically sets the aspect ratio according to the input signal.
Displays images in the same aspect ratio of the input signal.
Displays images at a 4:3 aspect ratio.
Displays images at a 16:9 aspect ratio.
Displays images using the full size of the projection area, but does
not maintain the aspect ratio.
Displays images using the full width (H-Zoom) or full height (V-
Zoom) of the projection area and maintains the aspect ratio of the
image. Areas that exceed the edges of the projected screen are not
projected.
Displays images as is (aspect ratio and resolution are maintained).
Areas that exceed the edges of the projected screen are not
projected.
130
Advertisement
Table of Contents
