Installation Procedure
Step 11
Press
button to be changed to HEAT mode in the OFF status
1 Press
button to enter SEG23 value.
2 Press
button to enter SEG24 value.
Step 12
Press
button to check whether the option code you entered is correct or not.
Press operation button
Setting an indoor unit address (MAIN/RMC)
1 Check whether power is supplied or not.
When the indoor unit is not plugged in, there
should be additional power supply in the
indoor unit.
2 The panel(display ) should be connected to an indoor unit to receive option.
3 Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system
plan.
4 Assign an indoor unit address by wireless remote controller.
The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000"
There is no need to assign extra ADDRESS for 1:1 installation between indoor unit and outdoor unit.
English
32
Operation
to enter option.
Indication
Indoor Unit
1(L)
F2
2(N)
F1