Antenna Connector - Edimax EW-7206APg Quick Install Manual

Back Panel

Antenna Connector

This is where you connect the antenna. It is a round connector
(standard Reverse SMA).
12 VDC
This is where you connect the power adapter.
Reset
The reset button has two functions.
1. If you want to reboot the Access Point, use a pencil tip to
press the reset button no more than 4 seconds.
2. If you press and hold the reset button for more than 4
seconds, the Access Point will reset to the factory defaults
(Warning: Your settings will be deleted and replaced with the
factory default settings).
10/100M
(EW-7206APg / EW-7206PDg )
This LAN port is where you connect the Access Point to your
Ethernet devices (switch or router).
1. 2. 3. 4. 5.
These LAN ports are where you connect the Access Point to
your Ethernet devices (switches or routers) or to computers.
EW-7206APg / EW-7206PDg
EW-7209APg
(EW-7209APg)
5