Inbound Filters - D-Link DIR-615/T User Manual

Section 3 - Coniguration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound filters can be used with virtual
server, port forwarding, or remote administration features.
Name:
Enter a name for the inbound filter rule.
Action:
Select Allow or Deny.
Enable:
Check to enable rule.
Source IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify
an IP range.
Source IP End:
Enter the ending IP address. Enter 255.255.255.255 if you do not want
to specify an IP range.
Save:
Click the Save button to apply your settings. You must click Save
Settings at the top to save the settings.
Inbound Filter
This section will list any rules that are created. You may click the Edit icon
Rules List:
to change the settings or enable/disable the rule, or click the Delete
icon to remove the rule.
D-Link DIR-615 User Manual

Inbound Filters

38