Table of Contents
Advertisement
Section 3 - Coniguration
My IPv6
Select PPPoE from the drop-down menu.
Connection
Is:
PPPoE
Enter the PPPoE account settings supplied by your Internet provider.
Session:
Address
Select Static if your ISP assigned you an IP address, subnet mask, gateway,
Mode:
and DNS server addresses. In most cases, select Dynamic.
IP Address:
Enter the IP address (Static PPPoE only).
Username:
Enter your PPPoE user name.
Password:
Enter your PPPoE password and retype the password in the next box.
Service
Enter the ISP Service Name (optional).
Name:
Reconnect
Select either Always-on, On-Demand, or Manual.
mode:
Maximum
Enter a maximum idle time during which the Internet connection is
Idle Time:
maintained during inactivity.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS
Select either Obtain IPv6 DNS Servers Automatically or Use the
Settings:
following IPv6 DNS Servers.
Primary/
Enter the primary and secondary DNS server addresses.
Secondary
DNS Address:
Enable
Check this box to enable DHCP prefix delegation for each LAN on the
DHCP-D:
network.
LAN IPv6
Enter the LAN (local) IPv6 address for the router.
Address:
D-Link DIR-615 User Manual
PPPoE
47
Advertisement
Table of Contents
