Getting Ready To Sew Connecting The Power Supply; Before Using Your Sewing Machine; Operating Instructions - Janome MXL50 Instruction Book

Table of Contents

Advertisement

z
b
q
x c v
t
r
n
z
v
q
x c v
e
e
w
u
y
i
w
t
r
y
GETTING READY TO SEW
Connecting the Power Supply
Using the foot control
z Turn off the power switch q.
x Insert the pin connector w into the jack e.
c Insert the machine plug r into the power inlet t.
v Insert the power supply plug y into the wall outlet u.
b Turn on the power switch q.
q Power switch
w Pin connector
e Jack
r Machine plug
t Power inlet
y Power supply plug
u Wall outlet
n The foot control sign i will be displayed when the
foot control is connected to the machine.
i Foot control sign
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control.

Before Using Your Sewing Machine

Before using your sewing machine for the first time,
place a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away any
oil which may appear.
Using the start/stop button
z Turn off the power switch q.
x Insert the machine plug w into the power inlet e.
c Insert the power supply plug r into the wall outlet t.
v Turn on the power switch q.
q Power switch
w Machine plug
e Power inlet
r Power supply plug
t Wall outlet
y Start/Stop button
NOTE:
The start/stop button y does not work when the foot
control is connected.

Operating Instructions:

The symbol "O" on the switch indicates the "off" position
of the switch.
Foot control model 21371 or YC-485EC-1 is used with
this sewing machine.
For the U.S.A and Canada only:
For appliances with a polarized plug (one blade wider
than the other): To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way.
6

Advertisement

Table of Contents
loading

Table of Contents