Mitsubishi Electric CRHV-P600YA-HPB Service Handbook page 81

[ VII Control ]
Step 4
Press the push
switch SWP3 to
save the change.
HWE1312A
Heating ECO (Curve)
Water temp.
Water temp.
setting C3
Water temp.
setting C5
Water temp.
setting C1
Outside temp. Outside temp.
setting C4 setting C6
* Always use a value for setting C6 that is between setting value C2 and setting value C4, and for setting C5 between setting value
C1 and setting value C3.
Press SWP3 once within one minute of changing the setting with SWP1 or SWP2 to save the
setting.
Once the new setting is saved, the display will stop blinking and stay lit. The display will, then,
return to the item code display mode.
If SWP3 is not pressed within one minute, the change will not be saved and the display will
return to the item code display mode.
Outside temp.
Outside temp.
setting C2
- 74 -
GB