Ipi Electronic System Wiring Diagram - Empire Comfort Systems DVP36FP30N-5 Installation Instructions And Owner's Manual

Direct vent zero clearance gas fireplace heater
Hide thumbs Also See for DVP36FP30N-5:
Table of Contents

Advertisement

IPI eLeCtRoNIC SYSteM WIRING DIAGRAM

If any of the original wire as supplied with this unit must be replaced, it must be replaced with equivalent gauge and temperature
rated wire.
This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently
located, manufactured (mobile) home where not prohibited by local codes. This appliance is not convertible for use with other gases,
unless a certified kit is used.
CAUtIoN
Do not operate the appliance with liner(s) removed, cracked or broken. Replacement of the liner(s) should be done by a
licensed or qualified service person.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, personal injury or loss of
life. Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Page 50
39358-3-1019

Advertisement

Table of Contents
loading

Table of Contents