HoMedics Walgreens Premium Arm WGNBPA-960BT Manual page 13

4. After all symbols disappear, the display will show "00". The
monitor is "Ready to Measure" and will automatically inflate
the cuff to begin measurement.
5. When the measurement is completed, the cuff will deflate
entirely. Systolic pressure, diastolic pressure and pulse
will be shown simultaneously on the LCD screen. The
measurement is then automatically stored into memory.
Note:
• This monitor automatically returns to
standby mode approximately 60 seconds
after last operation. You may also press the
START/STOP button to return to standby
mode.
• To interrupt the measurement, you may
press the START/ STOP button. The cuff
will deflate immediately after a button is pressed.
23
Using Triple-Check Measurement:
1. Please make sure the Triple-Check switch, located on the
back of the unit, is in the ON position.
ON
2. Press the USER-SELECT button. After the user number
is selected, press the START/STOP button to confirm the
chosen user.
Date Link
3. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
Note:
If the Rest Assure feature is ON, the 5 minute countdown will
begin after checking procedure is complete.
4. After all symbols disappear, the display will show "00". The
monitor is "Ready to Measure" and will automatically inflate
the cuff to begin measurement.
OFF AM/PM ON OFF
Triple Check Rest Assure
24