Transmit Readings To Your Mobile Device - HoMedics Walgreens Premium Arm WGNBPA-960BT Manual

5. When the measurement is completed, the cuff will deflate
entirely. Once the cuff is fully deflated, a 1 minute countdown
will begin before starting the second measurement
automatically. This process will continue until the end of
the third measurement.
Note:
• If an ERROR code is displayed during measurement, the
monitor will repeat the measurement up to 3 times during the
consecutive measurement process.
• Remain still until all 3 measurements are completed.
6. At the conclusion of the third measurement, the Triple-Check
average will be displayed.
To review your individual results that make the Triple-Check
average, press the + button.
press the
+ button
25

TRANSMIT READINGS TO YOUR MOBILE DEVICE

This monitor syncs your blood pressure readings
to the Walgreens Connect App that is free to
download on the App Store
Google Play™ . Make sure you have the
Walgreens Connect App downloaded, and open
on your mobile device before trying to transmit
your blood pressure measurements.
Before attempting to sync the blood pressure monitor with
your mobile device, make sure Bluetooth is turned ON, on both
your mobile device and the monitor.
Automatically transmit readings:
After a measurement is taken, the Bluetooth icon
on the screen as the monitor automatically transmits your
blood pressure readings to the App.
Manually transmit readings:
Press the Bluetooth button
will automatically be transmitted to the App. The
Bluetooth icon will appear on the screen as the
monitor transmits your blood pressure
readings to the App.
If the transmission(s) were successful,
the Bluetooth icon will be displayed
on the screen. See Fig. 1.
and on
SM
will appear
. The readings
HL858CB ( Bluetooth)
LCD View Area: 74mm x 95 mm
Digital Size:43.5mm
Fig. 1
26