System Log - TP-Link Archer VR2800 User Manual

Chapter 15
3 Tick the check box to enable
via HTTPS to allow for HTTPS connection. Keep the
4 Set the client device allowed for remote management. Select
devices to manage the modem router. If you just want to allow a specific device to
manage the modem router, select
IP/MAC address of the remote device.
5 Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
modem router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
continue. To avoid this warning, you can download and install the certificate on the modem router's web management page at
Advanced > System Tools > Administration.
2. The router's WAN IP is usually a dynamic IP. Please refer to
the router through a domain name.
15 8

System Log

System Log can help you know what happened to your modem router, facilitating
you to locate the malfunctions. For example when your modem router does not work
properly, you will need to save the system log and send it to the technical support for
troubleshooting.
Remote Management. Enable
Only the Following IP/MAC Address
Manage This Router via the Address
Set Up a Dynamic DNS Service Account
Administrate Your Network
Remote Management
Port as the default setting.
All to allow all remote
and enter the
field to manage the
Trust (or a similar option) to
if you want to log in to
102