TP-Link Archer VR2800 User Manual page 89

Chapter 14
3 Click Start WPS
4 Press the WPS button of the client device directly.
5 The WPS LED of the router flashes for about 2 minutes during the WPS process.
6 When the WPS LED is on, the client device has successfully connected to the
modem router.
Method 3: Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN.
1 Visit http://tplinkmodem.net, and log in with the account you set for the router.
2 Go to Advanced
3 Take a note of the Current PIN of the modem router. You can also click the
button to get a new PIN.
4 On the client device, enter the modem router's PIN. (The default PIN is also printed
on the label of the modem router.)
5 The WPS LED flashes for about two minutes during the WPS process.
6 When the WPS LED is on, the client device has successfully connected to the
modem router.
Note:
1. The WPS LED on the modem router will light on for five minutes if the device has been successfully added to the network.
2. The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the wireless
function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the modem router
1 Visit http://tplinkmodem.net, and log in with the account you set for the router.
2 Go to Advanced
on the page.
> Wireless > WPS page. Click
> Wireless > WPS page. Click
Specify Your Network Settings
Method Two--PIN.
Method Two--PIN.
Generate
85