TP-Link Archer VR2800 User Manual page 37

Chapter 8
¾ Method 1:
1 ) Open the
2 ) Type the server address in the address bar:
3 ) Press
4 ) Access with the username and password you set in
¾ Method 2:
Open a web browser and type the server address
IP address of the modem router>:<port number>
Windows
https://59.40.2.243:8443) in the address bar, then press Enter. If
computer
you have specified the domain name of the modem router, you
can also type in
https://MyDomainName:8443)
Access with the username and password you set in
Authentication for Data
You can get the WAN IP address on
¾ Method 3:
Install an SFTP client (e.g. FileZilla) in your computer, configure the
protocol parameters (enter the WAN address of the router and the
username and password you set in
Data
via the SFTP client.
Tips:
You can also access the USB disk via a third-party app for network files management, which
can resume broken file transfers.
Smart
Use a third-party app for network files management.
device
Tips:
Click Set Up a Dynamic DNS Service Account
Windows Explorer
Windows users) or open a web browser.
Type in ftp://<WAN IP address of the modem router>:<port
number> (such as ftp://59.40.2.243:21). If you have specified
the domain name of the modem router, you can also type
in ftp://<domain name>:<port number>
MyDomainName:21)
Enter on the keyboard.
Authentication for Data
https://<domain name>:<port number>
Security.
Security), and then you can access the USB storage device
to learn how to set up a domain name for your modem router.
(or go to Computer, only for
Security.
Advanced > Status
To Set up Authentication for
USB Settings
(such as ftp://
To Set up
https://<WAN
(such as
(such as
To Set up
page.
33