Create Static Routes - TP-Link Archer VR2800 User Manual

Chapter 14
How can I
do that?
Done!
14 6

Create Static Routes

A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
devices I use for work whilst keeping all devices' access to the
internet.
1 Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2 Go to Advanced >
configuration page where some interfaces can be grouped
together. Click Add
3 Name the group.
4 Check the boxes of
Wi-Fi 2.4G network and
LAN interface respectively.
5 Click Enable Group Isolation
disallow other devices from communicating with them.
6 Click OK to save the settings.
Now your working devices connected to LAN1 and LAN3 are in
an isolated group!
Note: VLAN function is enabled by default. You cannot disable it when IPTV
is enabled.
Specify Your Network Settings
Network > Interface Grouping
to create a group.
LAN1 and LAN3 in Available LAN. Here
Wi-Fi 5G network are viewed as a
to isolate working devices and
to open the
90