View System Log - TP-Link Archer C6 User Manual

Chapter 13
• Allow all devices to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTP port as default settings (recommended) or enter a value between
1024 and 65535.
3. Select All Devices
4. Click SAVE.
Devices on the internet can log in to
as http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on
• The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTP port as default settings (recommended) or enter a value between
1024 and 65535.
3. Select Specified Device
4. In the Only this IP Address
the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips: The router's WAN IP is usually a dynamic IP. Please refer to
to log in to the router through a domain name.
13 6

View System Log

When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
Remote Management.
for Remote Managers.
http://Router's WAN IP address:port number
Network Map
Remote Management.
for Remote Managers.
field, enter the IP address of the remote device to manage
> Internet.
Set Up a Dynamic DNS Service Account
Set Up a Dynamic DNS Service Account
Manage the Router
(such
if you want to log
http://Router's WAN
if you want
72